{
  "config": {
    "flow_title": "{name}",
    "step": {
      "user": {
        "title": "Set up ninlight lamp",
        "description": "Enter the address of the lamp. The token is prefilled with the public default token – anyone on your network who knows it can control and reflash the lamp.",
        "data": { "host": "Host", "token": "Token" },
        "data_description": {
          "host": "IP address or ninlight-xxxx.local name of the lamp.",
          "token": "Authorization token of the lamp."
        }
      },
      "zeroconf_confirm": {
        "title": "Set up {name}",
        "description": "Found the ninlight lamp {name} at {host}. The token is prefilled with the public default token – anyone on your network who knows it can control and reflash the lamp.",
        "data": { "token": "Token" }
      },
      "reauth_confirm": {
        "title": "Re-authenticate {name}",
        "description": "The lamp rejected the stored token. Enter its current token.",
        "data": { "token": "Token" }
      },
      "reconfigure": {
        "title": "Reconfigure lamp",
        "data": { "host": "Host", "token": "Token" }
      }
    },
    "error": {
      "cannot_connect": "Cannot reach the lamp.",
      "invalid_auth": "The lamp rejected the token.",
      "not_ninlight": "The device did not answer like a ninlight lamp.",
      "unknown": "Unexpected error."
    },
    "abort": {
      "already_configured": "This lamp is already set up.",
      "not_ninlight": "The device did not announce itself like a ninlight lamp.",
      "wrong_device": "This address belongs to a different lamp.",
      "reauth_successful": "Re-authentication was successful.",
      "reconfigure_successful": "Reconfiguration was successful."
    }
  },
  "options": {
    "step": {
      "init": {
        "title": "ninlight options",
        "data": {
          "scan_interval": "Polling interval (seconds)",
          "lamp_base_url": "Address lamps use to reach Home Assistant"
        },
        "data_description": {
          "lamp_base_url": "Only needed for firmware updates if lamps cannot reach Home Assistant's internal URL over plain http, e.g. http://192.168.1.50:8123"
        }
      }
    },
    "error": {
      "invalid_base_url": "Must be a plain http:// address with host and optional port, without path.",
      "base_url_too_long": "Address too long – the lamp accepts at most 255 characters for the whole firmware URL."
    }
  },
  "entity": {
    "number": {
      "fade_in": { "name": "Fade-in" },
      "fade_out": { "name": "Fade-out" },
      "transition_default": { "name": "Default transition" }
    },
    "select": {
      "power_on_behaviour": {
        "name": "Power-on behaviour",
        "state": { "last": "Last state", "on": "On", "off": "Off" }
      }
    },
    "switch": {
      "wake_on_change": { "name": "Turn on when changed" }
    },
    "sensor": {
      "ip_address": { "name": "IP address" },
      "free_heap": { "name": "Free memory" },
      "last_ota_error": { "name": "Last update error" },
      "boot_time": { "name": "Last start" }
    }
  },
  "exceptions": {
    "cannot_connect": { "message": "Cannot reach the lamp." },
    "auth_failed": { "message": "The lamp rejected the token." },
    "request_failed": { "message": "The lamp rejected the request: {message}" },
    "update_busy": { "message": "An update is already running on the lamp." },
    "no_update": { "message": "No firmware update is available." },
    "no_http_url": { "message": "Lamps can only reach Home Assistant over plain http. Set the address in the integration options." },
    "lamp_url_too_long": { "message": "The firmware URL is longer than the 255 characters the lamp accepts." },
    "image_invalid": { "message": "The firmware file changed or is no longer valid." },
    "wifi_guard": { "message": "This firmware does not contain the Wi-Fi credentials for {ssid}; the lamp would lose its network connection." },
    "update_failed": { "message": "The update failed: {reason}" },
    "update_timeout": { "message": "The lamp did not report the new firmware within 12 minutes." }
  },
  "issues": {
    "default_token": {
      "title": "{name} uses the public default token",
      "description": "Anyone on your network can control and reflash this lamp with the default token. Set your own token on the lamp and enter it via reconfigure."
    },
    "wifi_guard": {
      "title": "Firmware for {name} not offered",
      "description": "The firmware folder contains {version} for {device_type}, but without Wi-Fi credentials for {ssid}. The lamp only knows its Wi-Fi from its firmware and would lose its network connection after this update, so the update is not offered."
    }
  }
}