ha-ninlight/custom_components/ninlight/strings.json

{
  "config": {
    "flow_title": "{name}",
    "step": {
      "user": {
        "title": "Set up ninlight lamp",
        "description": "Enter the address of the lamp. The token is prefilled with the public default token – anyone on your network who knows it can control and reflash the lamp.",
        "data": {
          "host": "Host",
          "token": "Token"
        },
        "data_description": {
          "host": "IP address or ninlight-xxxx.local name of the lamp.",
          "token": "Authorization token of the lamp."
        }
      },
      "zeroconf_confirm": {
        "title": "Set up {name}",
        "description": "Found the ninlight lamp {name} at {host}. The token is prefilled with the public default token – anyone on your network who knows it can control and reflash the lamp.",
        "data": {
          "token": "Token"
        }
      },
      "reauth_confirm": {
        "title": "Re-authenticate {name}",
        "description": "The lamp rejected the stored token. Enter its current token.",
        "data": {
          "token": "Token"
        }
      },
      "reconfigure": {
        "title": "Reconfigure lamp",
        "data": {
          "host": "Host",
          "token": "Token"
        }
      }
    },
    "error": {
      "cannot_connect": "Cannot reach the lamp.",
      "invalid_auth": "The lamp rejected the token.",
      "not_ninlight": "The device did not answer like a ninlight lamp.",
      "unknown": "Unexpected error."
    },
    "abort": {
      "already_configured": "This lamp is already set up.",
      "not_ninlight": "The device did not announce itself like a ninlight lamp.",
      "wrong_device": "This address belongs to a different lamp.",
      "reauth_successful": "Re-authentication was successful.",
      "reconfigure_successful": "Reconfiguration was successful."
    }
  },
  "options": {
    "step": {
      "init": {
        "title": "ninlight options",
        "data": {
          "scan_interval": "Polling interval (seconds)",
          "lamp_base_url": "Address lamps use to reach Home Assistant"
        },
        "data_description": {
          "lamp_base_url": "Only needed for firmware updates if lamps cannot reach Home Assistant's internal URL over plain http, e.g. http://192.168.1.50:8123"
        }
      }
    },
    "error": {
      "invalid_base_url": "Must be a plain http:// address with host and optional port, without path.",
      "base_url_too_long": "Address too long – the lamp accepts at most 255 characters for the whole firmware URL."
    }
  },
  "entity": {
    "number": {
      "fade_in": {
        "name": "Fade-in"
      },
      "fade_out": {
        "name": "Fade-out"
      },
      "transition_default": {
        "name": "Default transition"
      },
      "sacn_universe": {
        "name": "sACN universe"
      },
      "sacn_start_slot": {
        "name": "sACN start slot"
      }
    },
    "select": {
      "power_on_behaviour": {
        "name": "Power-on behaviour",
        "state": {
          "last": "Last state",
          "on": "On",
          "off": "Off"
        }
      },
      "sacn_on_timeout": {
        "name": "sACN after timeout",
        "state": {
          "release": "Back to Home Assistant",
          "hold": "Hold last values"
        }
      },
      "sacn_layout": {
        "name": "sACN slot layout",
        "state": {
          "dimmer": "Dimmer first",
          "rgb": "RGB only"
        }
      }
    },
    "switch": {
      "wake_on_change": {
        "name": "Turn on when changed"
      },
      "sacn_enabled": {
        "name": "sACN reception"
      }
    },
    "sensor": {
      "ip_address": {
        "name": "IP address"
      },
      "free_heap": {
        "name": "Free memory"
      },
      "last_ota_error": {
        "name": "Last update error"
      },
      "boot_time": {
        "name": "Last start"
      }
    },
    "binary_sensor": {
      "sacn_active": {
        "name": "Remote controlled"
      },
      "sacn_multicast": {
        "name": "Multicast group"
      }
    }
  },
  "exceptions": {
    "cannot_connect": {
      "message": "Cannot reach the lamp."
    },
    "auth_failed": {
      "message": "The lamp rejected the token."
    },
    "request_failed": {
      "message": "The lamp rejected the request: {message}"
    },
    "update_busy": {
      "message": "An update is already running on the lamp."
    },
    "no_update": {
      "message": "No firmware update is available."
    },
    "no_http_url": {
      "message": "Lamps can only reach Home Assistant over plain http. Set the address in the integration options."
    },
    "lamp_url_too_long": {
      "message": "The firmware URL is longer than the 255 characters the lamp accepts."
    },
    "image_invalid": {
      "message": "The firmware file changed or is no longer valid."
    },
    "wifi_guard": {
      "message": "This firmware does not contain the Wi-Fi credentials for {ssid}; the lamp would lose its network connection."
    },
    "update_failed": {
      "message": "The update failed: {reason}"
    },
    "update_timeout": {
      "message": "The lamp did not report the new firmware within 12 minutes."
    }
  },
  "issues": {
    "default_token": {
      "title": "{name} uses the public default token",
      "description": "With the public default token, anyone on your network can reconfigure, restart, reflash, or factory-reset this lamp (losing its Wi-Fi settings and falling back to its onboarding access point). Switching and dimming are possible for anyone on the network regardless, unless auth_all is enabled. Set your own token on the lamp and enter it via reconfigure; to also protect switching, additionally enable auth_all."
    },
    "wifi_guard": {
      "title": "Firmware for {name} not offered",
      "description": "The firmware folder contains {version} for {device_type}, but without Wi-Fi credentials for {ssid}. The lamp only knows its Wi-Fi from its firmware and would lose its network connection after this update, so the update is not offered."
    }
  }
}