build: W600-SDK importiert, Firmware-Build und Hello am EVK

Docker-Build mit gcc-arm-none-eabi 4.9-2014q4 (statt Homebrew-Cask) verwendet, Dockerfile/tools/docker.sh dafür aus Task 13 vorgezogen. cmake/sdk.cmake schont gcc 4.9 (kennt -fcommon/-Wno-error=... nicht). Zwei zusätzliche SDK-Stubs (EarlyInit, pre_gpio_config) in src/sys/sdk_stubs.c ergänzt, siehe sdk/PATCHES.md.
2026-09-11 12:52:26 +02:00
parent 4e7ff78fc6
commit 1b0501179d
610 changed files with 224089 additions and 0 deletions
@@ -0,0 +1,190 @@
+/**
+ * @file wm_gpio.h
+ *
+ * @brief GPIO Driver Module
+ *
+ * @author dave
+ *
+ * Copyright (c) 2014 Winner Microelectronics Co., Ltd.
+ */
+#ifndef WM_GPIO_H
+#define WM_GPIO_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "wm_type_def.h"
+#include "wm_io.h"
+
+/** gpio interrupte callback function */
+typedef void (*tls_gpio_irq_callback)(void *arg);
+
+/** Indicating gpio direction */
+enum tls_gpio_dir {
+    WM_GPIO_DIR_OUTPUT,    /**< output */
+    WM_GPIO_DIR_INPUT      /**< input */
+};
+
+/** Indicating gpio attribute */
+enum tls_gpio_attr {
+    WM_GPIO_ATTR_FLOATING,    /**< floating status */
+    WM_GPIO_ATTR_PULLHIGH,    /**< pull high */
+    WM_GPIO_ATTR_PULLLOW      /**< pull low */
+};
+
+/** Indicating gpio interrupt trigger type */
+enum tls_gpio_irq_trig {
+    WM_GPIO_IRQ_TRIG_RISING_EDGE,    /**< rising edge arises the interrupt */
+    WM_GPIO_IRQ_TRIG_FALLING_EDGE,   /**< falling edge arises the interrupt */
+    WM_GPIO_IRQ_TRIG_DOUBLE_EDGE,    /**< both rising edge and falling edge arise the interrupt */
+    WM_GPIO_IRQ_TRIG_HIGH_LEVEL,     /**< high power level arises the interrupt */
+    WM_GPIO_IRQ_TRIG_LOW_LEVEL       /**< low power level arises the interrupt */
+};
+
+/**
+ * @defgroup Driver_APIs Driver APIs
+ * @brief Driver APIs
+ */
+
+/**
+ * @addtogroup Driver_APIs
+ * @{
+ */
+
+/**
+ * @defgroup GPIO_Driver_APIs GPIO Driver APIs
+ * @brief GPIO driver APIs
+ */
+
+/**
+ * @addtogroup GPIO_Driver_APIs
+ * @{
+ */
+
+
+/**
+ * @brief          	This function is used to config gpio function
+ *
+ * @param[in]      	gpio_pin    		gpio pin num
+ * @param[in]      	dir         		gpio direction
+ * @param[in]      	attr        		gpio attribute
+ *
+ * @return          None
+ *
+ * @note
+ * All gpio's attribute can only be set as WM_GPIO_ATTR_FLOATING or WM_GPIO_ATTR_PULLHIGH on W600/W601.
+ */
+void tls_gpio_cfg(enum tls_io_name gpio_pin, enum tls_gpio_dir dir, enum tls_gpio_attr attr);
+
+
+/**
+ * @brief          This function is used to read gpio status
+ *
+ * @param[in]      gpio_pin    gpio pin num
+ *
+ * @retval         0     low level
+ * @retval         1     high level
+ *
+ * @note           None
+ */
+u8 tls_gpio_read(enum tls_io_name gpio_pin);
+
+
+/**
+ * @brief          	This function is used to modify gpio status
+ *
+ * @param[in]      	gpio_pin    	gpio pin num
+ * @param[in]      	value       	electrical level
+ *                  0: 				low  level
+ * 					1: 				high level
+ *
+ * @return         	None
+ *
+ * @note           None
+ */
+void tls_gpio_write(enum tls_io_name gpio_pin, u8 value);
+
+
+/**
+ * @brief          This function is used to config gpio interrupt
+ *
+ * @param[in]      gpio_pin    gpio pin num
+ * @param[in]      mode        interrupt trigger type
+ *
+ * @return         None
+ *
+ * @note           None
+ */
+void tls_gpio_irq_enable(enum tls_io_name gpio_pin, enum tls_gpio_irq_trig mode);
+
+
+/**
+ * @brief          This function is used to disable gpio interrupt
+ *
+ * @param[in]      gpio_pin    gpio pin num
+ *
+ * @return         None
+ *
+ * @note           None
+ */
+void tls_gpio_irq_disable(enum tls_io_name gpio_pin);
+
+
+/**
+ * @brief          This function is used to get gpio interrupt status
+ *
+ * @param[in]      gpio_pin    gpio pin num
+ *
+ * @retval         0     no interrupt happened
+ * @retval         1     interrupt happened
+ *
+ * @note           None
+ */
+u8 tls_get_gpio_irq_status(enum tls_io_name gpio_pin);
+
+
+/**
+ * @brief          This function is used to clear gpio interrupt flag
+ *
+ * @param[in]      gpio_pin    gpio pin num
+ *
+ * @return         None
+ *
+ * @note           None
+ */
+void tls_clr_gpio_irq_status(enum tls_io_name gpio_pin);
+
+
+/**
+ * @brief          This function is used to register gpio interrupt
+ *
+ * @param[in]      gpio_pin    gpio pin num
+ * @param[in]      callback    the gpio interrupt call back function
+ * @param[in]      arg         parammeter for the callback
+ *
+ * @return         None
+ *
+ * @note
+ * gpio callback function is called in interrupt,
+ * so can not operate the critical data in the callback fuuction,
+ * recommendation to send messages to other tasks to operate it.
+ */
+void tls_gpio_isr_register(enum tls_io_name gpio_pin,
+                           tls_gpio_irq_callback callback,
+                           void *arg);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+#endif /* end of WM_GPIO_H */
+
+/*** (C) COPYRIGHT 2014 Winner Microelectronics Co., Ltd. ***/