build: W600-SDK importiert, Firmware-Build und Hello am EVK

Docker-Build mit gcc-arm-none-eabi 4.9-2014q4 (statt Homebrew-Cask) verwendet, Dockerfile/tools/docker.sh dafür aus Task 13 vorgezogen. cmake/sdk.cmake schont gcc 4.9 (kennt -fcommon/-Wno-error=... nicht). Zwei zusätzliche SDK-Stubs (EarlyInit, pre_gpio_config) in src/sys/sdk_stubs.c ergänzt, siehe sdk/PATCHES.md.
2026-09-11 12:52:26 +02:00
parent 4e7ff78fc6
commit 1b0501179d
610 changed files with 224089 additions and 0 deletions
@@ -0,0 +1,138 @@
+/***************************************************************************** 
+* 
+* File Name : wm_iouart.h
+* 
+* Description: IO uart Driver Module 
+* 
+* Copyright (c) 2014 Winner Microelectronics Co., Ltd. 
+* All rights reserved. 
+* 
+* Author : dave
+* 
+* Date : 2015-8-13
+*****************************************************************************/ 
+#ifndef WM_IO_UART_H
+#define WM_IO_UART_H
+
+#include "wm_uart.h"
+#include "wm_io.h"
+
+
+#define IO_UART_FOR_PRINT	0
+
+#define IO_UART_TX		WM_IO_PB_08
+#define IO_UART_RX		WM_IO_PB_09
+
+#define IO_UART_HIGH	1
+#define IO_UART_LOW		0
+
+#define TLS_IO_UART_RX_BUF_SIZE   1024
+#define TLS_IO_UART_TX_BUF_SIZE   1024
+
+#define IO_UART_RATE_MUL	8	//采样率=该值*波特率
+
+#define IO_UART_ONEBITE_SAMPLE_NUM	2
+#define IO_UART_ONEBYTE_BIT	10
+
+typedef struct tls_io_uart{
+	struct tls_uart_circ_buf    recv;
+	int timercnt;	
+	u8 bit[IO_UART_ONEBITE_SAMPLE_NUM];			//每个bit采样3次，然后判断高低电平
+	u8 bitcnt;		//单个bit采样次数
+	u8 bitnum;		//bit号，一个byte共有10个bit(1个起始位+8个数据位+1个停止位)
+	u8 ifrx;			//是否正在rx	
+	u8 iftx;			//是否正在tx
+	u8 timerid;
+	
+}tls_io_uart_t;
+
+/**
+ * @defgroup Driver_APIs Driver APIs
+ * @brief Driver APIs
+ */
+
+/**
+ * @addtogroup Driver_APIs
+ * @{
+ */
+
+/**
+ * @defgroup IOUART_Driver_APIs IOUART Driver APIs
+ * @brief IOUART driver APIs
+ */
+
+/**
+ * @addtogroup IOUART_Driver_APIs
+ * @{
+ */
+
+/**
+ * @brief          	This function is used to initialize uart io
+ *
+ * @param[in]      	bandrate      iouart baudrate
+ *
+ * @return         	WM_SUCCESS    success
+ * @return         	WM_FAILED     fail
+ *
+ * @note           	None
+ */
+int tls_iouart_init(int bandrate);
+
+/**
+ * @brief          	This function is used to restore uart io cfg
+ *
+ * @param[in]      	None
+ *
+ * @return         	WM_SUCCESS    success
+ *
+ * @note           	None
+ */
+int tls_iouart_destroy(void);
+
+/**
+ * @brief          	This function is used to read data from uart io
+ *
+ * @param[in]       buf        is the user buffer
+ * @param[in]       readsize   is the user read size
+ *
+ * @return         	>0         	  copy data size
+ * @return         	WM_FAILED     fail
+ *
+ * @note           	None
+ */
+int tls_iouart_read(u8 * buf, int bufsize);
+
+/**
+ * @brief          This function is used to transfer data synchronously.
+ *
+ * @param[in]      buf          is a buf for saving user data
+ * @param[in]      writesize    is the user data length
+ *
+ * @retval         WM_SUCCESS    tx success
+ * @retval         WM_FAILED     tx failed
+ *
+ * @note           None
+ */
+int tls_iouart_write(u8 * buf, int bufsize);
+
+/**
+ * @brief          This function is used to output a character to the serial port.
+ *
+ * @param[in]      ch      character to be output
+ *
+ * @retval         ch
+ *
+ * @note           None
+ */
+int tls_iouart_output_char(int ch);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* WM_IO_UART_H */
+