build: W600-SDK importiert, Firmware-Build und Hello am EVK

Docker-Build mit gcc-arm-none-eabi 4.9-2014q4 (statt Homebrew-Cask) verwendet, Dockerfile/tools/docker.sh dafür aus Task 13 vorgezogen. cmake/sdk.cmake schont gcc 4.9 (kennt -fcommon/-Wno-error=... nicht). Zwei zusätzliche SDK-Stubs (EarlyInit, pre_gpio_config) in src/sys/sdk_stubs.c ergänzt, siehe sdk/PATCHES.md.
2026-09-11 12:52:26 +02:00
parent 4e7ff78fc6
commit 1b0501179d
610 changed files with 224089 additions and 0 deletions
@@ -0,0 +1,177 @@
+/**
+ * @file    wm_irq.h
+ *
+ * @brief   interupt driver module
+ *
+ * @author  dave
+ *
+ * Copyright (c) 2015 Winner Microelectronics Co., Ltd.
+ */
+
+#ifndef WM_IRQ_H
+#define WM_IRQ_H
+
+#include "wm_type_def.h"
+
+/* Number of interrupts. */
+
+#define INTR_CNT 41
+
+#define SDIO_UP_DATA_INT            (0UL)
+#define SDIO_DOWN_DATA_INT          (1UL)
+#define SDIO_UP_CMD_INT             (2UL)
+#define SDIO_DOWN_CMD_INT           (3UL)
+#define MAC_INT                     (4UL)
+
+#define RX_INT                      (6UL)
+#define TX_MGMT_COMPLETE_INT        (7UL)
+#define TX_DATA_COMPLETE_INT        (8UL)
+#define PMU_TIMER1_INT              (9UL)
+#define PMU_TIMER0_INT   			(10UL)
+#define PMU_GPIO_WAKEUP_INT         (11UL)
+#define PMU_SDIO_WAKEUP_INT         (12UL)
+#define DMA0_INT                    (13UL)
+#define DMA1_INT                    (14UL)
+#define DMA2_INT                    (15UL)
+#define DMA3_INT                    (16UL)
+#define DMA4_INT                    (17UL)
+#define DMA_BURST_INT               (18UL)
+#define I2C_INT                     (19UL)
+#define ADC_INT                     (20UL)
+#define SPI0_INT                    (21UL)
+#define SPI1_INT                    (22UL)
+#define UART0_INT                   (23UL)
+#define UART1_INT                   (24UL)
+#define GPIO_INT                    (25UL)
+#define TIMER0_INT                  (26UL)
+#define TIMER1_INT                  (27UL)
+#define TIMER2_INT                  (28UL)
+#define   TIMER3_INT                (29UL)
+#define   TIMER4_INT                (30UL)
+#define   TIMER5_INT                (31UL)
+#define   WATCHDOG_INT              (32UL)
+#define   PMU_BOD_INT              	(33UL)
+#define   FLASH_INT                 (34UL)
+#define   PWM_INT                 	(35UL)
+#define   I2S_INT              	    (36UL)
+#define	  PMU_RTC_INT				(37UL)
+#define	  RSA_INT					(38UL)
+#define   CRYPTION_INT              (39UL)
+#define   GPIOB_INT                 (40UL)
+#define   UART2_INT					(41UL)	
+
+#define IRQ_MAX_SYSCALL_PRIORITY    0x0B
+
+typedef void (*intr_handler_func) (void *);
+
+/**
+ * @typedef struct tls_irq_handler
+ */
+typedef struct tls_irq_handler
+{
+    void (*handler) (void *);
+    void *data;
+//  const char  *name;
+    u32 counter;
+} tls_irq_handler_t;
+
+/**
+ * @defgroup Driver_APIs Driver APIs
+ * @brief Driver APIs
+ */
+
+/**
+ * @addtogroup Driver_APIs
+ * @{
+ */
+
+/**
+ * @defgroup IRQ_Driver_APIs IRQ Driver APIs
+ * @brief IRQ driver APIs
+ */
+
+/**
+ * @addtogroup IRQ_Driver_APIs
+ * @{
+ */
+
+/**
+ * @brief          This function is used to initial system interrupt.
+ *
+ * @param[in]      None
+ *
+ * @return         None
+ *
+ * @note           None
+ */
+void tls_irq_init(void);
+
+/**
+ * @brief          This function is used to register interrupt handler function.
+ *
+ * @param[in]      vec_no           interrupt NO
+ * @param[in]      handler
+ * @param[in]      *data
+ *
+ * @return         None
+ *
+ * @note           None
+ */
+void tls_irq_register_handler(u8 vec_no, intr_handler_func handler, void *data);
+
+
+/**
+ * @brief          This function is used to enable interrupt.
+ *
+ * @param[in]      vec_no       interrupt NO
+ *
+ * @return         None
+ *
+ * @note           None
+ */
+void tls_irq_enable(u8 vec_no);
+
+/**
+ * @brief          	This function is used to set interrupt priority.
+ *
+ * @param[in]      	vec_no       interrupt no
+ * @param[in]      	priority     priority
+ *
+ * @return         	None
+ *
+ * @note           	None
+ */
+void tls_irq_set_priority(u8 vec_no, u8 priority);
+
+/**
+ * @brief          This function is used to disable interrupt.
+ *
+ * @param[in]      vec_no       interrupt NO
+ *
+ * @return         None
+ *
+ * @note           None
+ */
+void tls_irq_disable(u8 vec_no);
+
+
+/**
+ * @brief          This function is used to get the isr count.
+ *
+ * @param[in]      None
+ *
+ * @retval         count
+ *
+ * @note           None
+ */
+u8 tls_get_isr_count(void);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* WM_IRQ_H */