build: W600-SDK importiert, Firmware-Build und Hello am EVK

Docker-Build mit gcc-arm-none-eabi 4.9-2014q4 (statt Homebrew-Cask) verwendet,
Dockerfile/tools/docker.sh dafür aus Task 13 vorgezogen. cmake/sdk.cmake schont
gcc 4.9 (kennt -fcommon/-Wno-error=... nicht). Zwei zusätzliche SDK-Stubs
(EarlyInit, pre_gpio_config) in src/sys/sdk_stubs.c ergänzt, siehe sdk/PATCHES.md.

sdk/Include/Driver/wm_pmu.h

@@ -0,0 +1,239 @@
+/**
+ * @file    wm_pmu.h
+ *
+ * @brief   pmu driver module
+ *
+ * @author  dave
+ *
+ * Copyright (c) 2014 Winner Microelectronics Co., Ltd.
+ */
+#ifndef WM_PMU_H
+#define WM_PMU_H
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "wm_type_def.h"
+
+typedef void (*tls_pmu_irq_callback)(void *arg);
+
+/**
+ * @defgroup Driver_APIs Driver APIs
+ * @brief Driver APIs
+ */
+
+/**
+ * @addtogroup Driver_APIs
+ * @{
+ */
+
+/**
+ * @defgroup PMU_Driver_APIs PMU Driver APIs
+ * @brief PMU driver APIs
+ */
+
+/**
+ * @addtogroup PMU_Driver_APIs
+ * @{
+ */
+
+/**
+ * @brief          	This function is used to register pmu timer1 interrupt
+ *
+ * @param[in]      	callback    	the pmu timer1 interrupt call back function
+ * @param[in]      	arg         		parameter of call back function
+ *
+ * @return         	None
+ *
+ * @note
+ * user not need clear interrupt flag.
+ * pmu timer1 callback function is called in interrupt,
+ * so can not operate the critical data in the callback fuuction,
+ * recommendation to send messages to other tasks to operate it.
+ */
+void tls_pmu_timer1_isr_register(tls_pmu_irq_callback callback, void *arg);
+
+
+/**
+ * @brief          	This function is used to register pmu timer0 interrupt
+ *
+ * @param[in]      	callback    	the pmu timer0 interrupt call back function
+ * @param[in]      	arg         		parameter of call back function
+ *
+ * @return         	None
+ *
+ * @note
+ * user not need clear interrupt flag.
+ * pmu timer0 callback function is called in interrupt,
+ * so can not operate the critical data in the callback fuuction,
+ * recommendation to send messages to other tasks to operate it.
+ */
+void tls_pmu_timer0_isr_register(tls_pmu_irq_callback callback, void *arg);
+
+
+/**
+ * @brief          	This function is used to register pmu gpio interrupt
+ *
+ * @param[in]      	callback    	the pmu gpio interrupt call back function
+ * @param[in]      	arg         		parameter of call back function
+ *
+ * @return         	None
+ *
+ * @note
+ * user not need clear interrupt flag.
+ * pmu gpio callback function is called in interrupt,
+ * so can not operate the critical data in the callback fuuction,
+ * recommendation to send messages to other tasks to operate it.
+ */
+void tls_pmu_gpio_isr_register(tls_pmu_irq_callback callback, void *arg);
+
+
+/**
+ * @brief          	This function is used to register pmu sdio interrupt
+ *
+ * @param[in]      	callback    	the pmu sdio interrupt call back function
+ * @param[in]      	arg         		parameter of call back function
+ *
+ * @return         	None
+ *
+ * @note
+ * user not need clear interrupt flag.
+ * pmu sdio callback function is called in interrupt,
+ * so can not operate the critical data in the callback fuuction,
+ * recommendation to send messages to other tasks to operate it.
+ */
+void tls_pmu_sdio_isr_register(tls_pmu_irq_callback callback, void *arg);
+
+
+/**
+ * @brief          	This function is used to select pmu clk
+ *
+ * @param[in]      	bypass    pmu clk whether or not use bypass mode
+ *				1   pmu clk use 32K by 40MHZ
+ *				other pmu clk 32K by calibration circuit
+ *
+ * @return         	None
+ *
+ * @note           	None
+ */
+void tls_pmu_clk_select(u8 bypass);
+
+
+/**
+ * @brief          	This function is used to start pmu timer0
+ *
+ * @param[in]      	second  	vlaue of timer0 count[s]
+ *
+ * @return         	None
+ *
+ * @note           	None
+ */
+void tls_pmu_timer0_start(u16 second);
+
+
+/**
+ * @brief          	This function is used to stop pmu timer0
+ *
+ * @param		None
+ *
+ * @return         	None
+ *
+ * @note           	None
+ */
+void tls_pmu_timer0_stop(void);
+
+
+
+/**
+ * @brief          	This function is used to start pmu timer1
+ *
+ * @param[in]      	second  	vlaue of timer1 count[ms]
+ *
+ * @return         	None
+ *
+ * @note           	None
+ */
+void tls_pmu_timer1_start(u16 msec);
+
+
+/**
+ * @brief          	This function is used to stop pmu timer1
+ *
+ * @param		None
+ *
+ * @return         	None
+ *
+ * @note           	None
+ */
+void tls_pmu_timer1_stop(void);
+
+
+
+/**
+ * @brief          	This function is used to start pmu goto standby 
+ *
+ * @param		None
+ *
+ * @return         	None
+ *
+ * @note           	None
+ */
+void tls_pmu_standby_start(void);
+
+
+typedef enum {
+    TLS_PERIPHERAL_TYPE_I2C   = (1 << 0),
+    TLS_PERIPHERAL_TYPE_UART0 = (1 << 1),
+    TLS_PERIPHERAL_TYPE_UART1 = (1 << 2),
+    TLS_PERIPHERAL_TYPE_LSPI  = (1 << 3),
+    TLS_PERIPHERAL_TYPE_DMA   = (1 << 4),
+    TLS_PERIPHERAL_TYPE_RFCFG = (1 << 5),
+    TLS_PERIPHERAL_TYPE_TIMER = (1 << 6),
+    TLS_PERIPHERAL_TYPE_GPIO  = (1 << 7),
+    TLS_PERIPHERAL_TYPE_SDADC = (1 << 8),
+    TLS_PERIPHERAL_TYPE_PWM   = (1 << 9),
+    TLS_PERIPHERAL_TYPE_LCD   = (1 << 10),
+    TLS_PERIPHERAL_TYPE_I2S   = (1 << 11),
+    TLS_PERIPHERAL_TYPE_RSA   = (1 << 12),
+    TLS_PERIPHERAL_TYPE_GPSEC = (1 << 13),
+    TLS_PERIPHERAL_TYPE_7816  = (1 << 14)
+}tls_peripheral_type_s;
+
+/**
+ * @brief          	This function is used to close peripheral's clock
+ *
+ * @param[in]      	devices  	peripherals
+ *
+ * @return         	None
+ *
+ * @note           	None
+ */
+void tls_close_peripheral_clock(tls_peripheral_type_s devices);
+
+/**
+ * @brief          	This function is used to open peripheral's clock
+ *
+ * @param[in]      	devices  	peripherals
+ *
+ * @return         	None
+ *
+ * @note           	None
+ */
+void tls_open_peripheral_clock(tls_peripheral_type_s devices);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+#endif /* end of WM_PMU_H */
+
+/*** (C) COPYRIGHT 2014 Winner Microelectronics Co., Ltd. ***/
+
+