build: W600-SDK importiert, Firmware-Build und Hello am EVK

Docker-Build mit gcc-arm-none-eabi 4.9-2014q4 (statt Homebrew-Cask) verwendet, Dockerfile/tools/docker.sh dafür aus Task 13 vorgezogen. cmake/sdk.cmake schont gcc 4.9 (kennt -fcommon/-Wno-error=... nicht). Zwei zusätzliche SDK-Stubs (EarlyInit, pre_gpio_config) in src/sys/sdk_stubs.c ergänzt, siehe sdk/PATCHES.md.
2026-09-11 12:52:26 +02:00
parent 4e7ff78fc6
commit 1b0501179d
610 changed files with 224089 additions and 0 deletions
@@ -0,0 +1,187 @@
+/**************************************************************************//**
+ * @file     wm_lcd.c
+ * @author
+ * @version  
+ * @date  
+ * @brief
+ *
+ * Copyright (c) 2014 Winner Microelectronics Co., Ltd. All rights reserved.
+ *****************************************************************************/
+ 
+#include "wm_lcd.h"
+
+#define RTC_CLK		(32000UL)	
+
+/**
+ * @brief   Initialize LCD Frame Counter
+ * @param[in] freq   LCD reference refresh frequency in Hz that will be used
+ */
+void tls_lcd_fresh_ratio(uint16_t freq)
+{
+	uint8_t com_num;
+
+	if (freq == 0)
+	{
+		freq = 60;
+	}
+	
+	com_num = tls_bitband_read(HR_LCD_CR, LCD_CR_MODE_Pos) ? 4 : 8;
+	LCD->FRAMECNT = RTC_CLK/(com_num * freq);	
+}
+
+/**
+ * @brief
+ *   Turn on or clear a segment 
+ *
+ * @param[in] com
+ *   Which COM line to update
+ *
+ * @param[in] bit
+ *   Bit index of which field to change
+ *
+ * @param[in] enable
+ *   When one will set segment, when zero will clear segment
+ *
+ * @param[in] mode
+ *	 when one max configuration is 4x20, when zero max configuration is 8x16
+ *
+ */
+void tls_lcd_seg_set(int com, int bit, int on_off)
+{
+	int mode;
+	
+	/** get the mode congfig  when one max configuration is 4x20, when zero max configuration is 8x16 */
+	mode = tls_bitband_read(HR_LCD_CR, LCD_CR_MODE_Pos);	
+	
+	if (!mode && (com < 0 || com > 7) && (bit < 0 || bit > 15))
+	{
+		return ;
+	}
+	if (mode && (com < 0 || com > 3) && (bit < 0 || bit > 19))
+	{
+		return ;
+	}
+	
+	switch(com)
+	{
+		/** COM0 */
+		case 0:
+			tls_bitband_write(HR_LCD_COM0_1_SEG, bit, on_off);
+			break;
+		
+		/** COM1 */
+		case 1:
+			if (mode)
+				tls_bitband_write(HR_LCD_COM2_3_SEG, bit, on_off);
+			else
+			{
+				bit += 16;
+				tls_bitband_write(HR_LCD_COM0_1_SEG, bit, on_off);
+			}				
+			break;
+		
+		/** COM2 */
+		case 2:
+			if (mode)
+				tls_bitband_write(HR_LCD_COM4_5_SEG, bit, on_off);
+			else 
+				tls_bitband_write(HR_LCD_COM2_3_SEG, bit, on_off);
+			break;
+		
+		/** COM3 */
+		case 3:
+			if (mode)
+				tls_bitband_write(HR_LCD_COM6_7_SEG, bit, on_off);
+			else
+			{
+				bit += 16;
+				tls_bitband_write(HR_LCD_COM2_3_SEG, bit, on_off);
+			}
+			break;
+		
+		/** COM4 */
+		case 4:
+			tls_bitband_write(HR_LCD_COM4_5_SEG, bit, on_off);
+			break;
+		
+		/** COM5 */
+		case 5:
+			bit += 16;
+			tls_bitband_write(HR_LCD_COM4_5_SEG, bit, on_off);
+			break;
+		
+		/** COM6 */
+		case 6:
+			tls_bitband_write(HR_LCD_COM6_7_SEG, bit, on_off);
+			break;
+		
+		/** COM7 */
+		case 7:
+			bit += 16;
+			tls_bitband_write(HR_LCD_COM6_7_SEG, bit, on_off);
+			break;
+		
+		default:
+			break;
+	}
+}
+
+/**
+ * @brief  enable or disable the LCD module gpio
+ *
+ * @param[in] the config value per bit for one of LCD gpios, set 1 gpio output enable ,0 output disabled
+ *
+ */
+void tls_lcd_io_config(unsigned int val)
+{
+	tls_reg_write32(HR_LCD_IO_EN, val);
+}
+
+/**
+ * @brief
+ *   select the voltage of LCD module
+ *
+ */
+void tls_lcd_vlcd_sel(LCD_VlcdDef vlcd)
+{	
+	LCD->CTRL &= ~LCD_VLCD_MASK;
+	LCD->CTRL |= vlcd;	
+}
+
+
+/**
+ * @brief
+ *   set the duty of LCD module
+ *  
+ */
+void tls_lcd_duty_set(LCD_DutyDef duty)
+{	
+	LCD->CTRL &= ~LCD_DUTY_MASK;
+	LCD->CTRL |= duty;
+}
+
+
+/**
+ * @brief
+ *   set the bias of LCD module
+ * 
+ */
+void tls_lcd_bias_set(LCD_BiasDef bias)
+{
+	LCD->CTRL &= ~LCD_BIAS_MASK;
+	LCD->CTRL |= bias;		
+}
+
+/**
+ * @brief
+ *   initialize the lcd module
+ * 
+ */
+void tls_lcd_init(tls_lcd_options_t *opts)
+{
+	LCD->CTRL = 0;
+	LCD->CTRL = opts->mode | opts->bias | opts->duty | opts->vlcd | (1 << 12);
+	tls_lcd_fresh_ratio(opts->fresh_rate);	
+	TLS_LCD_ENABLE(opts->enable);
+	TLS_LCD_POWERDOWM(0);
+}