Die Registry für Einmal-URLs speicherte bisher nur einen Pfad; View und verify() lasen die Datei getrennt und zu unterschiedlichen Zeitpunkten erneut ein. Wurde die Datei zwischen Prüfung und Abruf ersetzt (z. B. gleicher Dateiname in build/ und build-nocreds/), erreichte ein nie geprüftes Image die Lampe und hebelte damit die WLAN-Sicherung aus. Jetzt werden die Bytes einmal im Install-Pfad gelesen, Gerätetyp/Version und WLAN-SSID auf genau diesen Bytes geprüft (FirmwareCatalog.verify_and_read, firmware.contains_ssid) und exakt diese Bytes in der Registry hinterlegt; die View serviert nur noch das, was tatsächlich geprüft wurde. Außerdem: Bewertungen (Katalog-Rescan-Signal) werden nicht mehr angestoßen, während ein Update läuft - das würde eine gerade flashende Lampe zusätzlich anfragen und Angebot/Issue unter dem laufenden Update verändern; nach jedem Update wird stattdessen genau einmal neu bewertet. Kommentar zum Install-Lock korrigiert (der eigentliche Lücke liegt vor dem Setzen der Flags, nicht in HAs eigener "bereits läuft"-Prüfung). Testlücke geschlossen: die View liefert jetzt nachweislich nur die zu ihrem Schlüssel gehörenden Bytes. Timeout in einem WLAN-Regressionstest verkürzt, damit er bei einem Rückfall nicht 12 Minuten hängt.
509 lines
20 KiB
Python
509 lines
20 KiB
Python
"""Firmware update entity: offer, Wi-Fi guard, install flow."""
|
|
|
|
from __future__ import annotations
|
|
|
|
import asyncio
|
|
from copy import deepcopy
|
|
from pathlib import Path
|
|
from typing import Any
|
|
from unittest.mock import MagicMock
|
|
from urllib.parse import urlsplit
|
|
|
|
from homeassistant.components.update import (
|
|
ATTR_IN_PROGRESS,
|
|
ATTR_INSTALLED_VERSION,
|
|
ATTR_LATEST_VERSION,
|
|
SERVICE_INSTALL,
|
|
)
|
|
from homeassistant.components.update import (
|
|
DOMAIN as UPDATE_DOMAIN,
|
|
)
|
|
from homeassistant.const import ATTR_ENTITY_ID, CONF_HOST, CONF_TOKEN, STATE_OFF, STATE_ON
|
|
from homeassistant.core import HomeAssistant
|
|
from homeassistant.core_config import async_process_ha_core_config
|
|
from homeassistant.exceptions import HomeAssistantError
|
|
from homeassistant.helpers import issue_registry as ir
|
|
import pytest
|
|
from pytest_homeassistant_custom_component.common import MockConfigEntry
|
|
from pytest_homeassistant_custom_component.typing import ClientSessionGenerator
|
|
|
|
from custom_components.ninlight import update as update_module
|
|
from custom_components.ninlight.api import NinlightBusyError, NinlightConnectionError
|
|
from custom_components.ninlight.const import CONF_LAMP_BASE_URL, DOMAIN
|
|
from custom_components.ninlight.shared import DATA_SHARED, async_scan_catalog
|
|
from custom_components.ninlight.update import depends_on_compiled_wifi
|
|
from tests.helpers import entity_id_for
|
|
from tests_unit.images import CONTENT_WITH_SSID, CONTENT_WITHOUT_SSID, build_image
|
|
from tests_unit.samples import HOST_RGB, MAC_RGB, SETTINGS_COMPILED, SETTINGS_STORED, TOKEN
|
|
|
|
BASE = "http://192.168.1.50:8123"
|
|
INSTALLED = "0.3.8-36-gca9bb"
|
|
NEWER = "0.3.8-47-g71a57"
|
|
NEWEST = "0.3.9-rc1"
|
|
EVEN_NEWER = "0.3.9-rc2" # newer than NEWEST
|
|
|
|
|
|
@pytest.fixture
|
|
def mock_config_entry() -> MockConfigEntry:
|
|
return MockConfigEntry(
|
|
domain=DOMAIN,
|
|
title="Klyqa GU10 RGB CW/WW 06b8",
|
|
unique_id=MAC_RGB,
|
|
data={CONF_HOST: HOST_RGB, CONF_TOKEN: TOKEN},
|
|
options={CONF_LAMP_BASE_URL: BASE},
|
|
)
|
|
|
|
|
|
@pytest.fixture(autouse=True)
|
|
def fast_polling(monkeypatch: pytest.MonkeyPatch) -> None:
|
|
monkeypatch.setattr(update_module, "OTA_POLL_INTERVAL_S", 0)
|
|
|
|
|
|
def put(directory: Path, name: str, **kwargs: Any) -> Path:
|
|
path = directory / name
|
|
path.write_bytes(build_image(**kwargs))
|
|
return path
|
|
|
|
|
|
async def rescan(hass: HomeAssistant) -> None:
|
|
await async_scan_catalog(hass, hass.data[DATA_SHARED])
|
|
await hass.async_block_till_done()
|
|
|
|
|
|
def wifi_issue(hass: HomeAssistant, entry: MockConfigEntry) -> ir.IssueEntry | None:
|
|
return ir.async_get(hass).async_get_issue(DOMAIN, f"wifi_guard_{entry.entry_id}")
|
|
|
|
|
|
async def install(hass: HomeAssistant) -> None:
|
|
await hass.services.async_call(
|
|
UPDATE_DOMAIN,
|
|
SERVICE_INSTALL,
|
|
{ATTR_ENTITY_ID: entity_id_for(hass, "update", "firmware")},
|
|
blocking=True,
|
|
)
|
|
|
|
|
|
def test_only_stored_wifi_is_independent() -> None:
|
|
assert not depends_on_compiled_wifi(SETTINGS_STORED)
|
|
assert depends_on_compiled_wifi(SETTINGS_COMPILED)
|
|
assert depends_on_compiled_wifi({"wifi": {"ssid": ""}})
|
|
assert depends_on_compiled_wifi({"wifi": {"source": "flash"}})
|
|
assert depends_on_compiled_wifi({})
|
|
|
|
|
|
async def test_no_images_no_update(hass: HomeAssistant, init_integration) -> None:
|
|
state = hass.states.get(entity_id_for(hass, "update", "firmware"))
|
|
assert state.state == STATE_OFF
|
|
assert state.attributes[ATTR_INSTALLED_VERSION] == INSTALLED
|
|
assert state.attributes[ATTR_LATEST_VERSION] == INSTALLED
|
|
|
|
|
|
async def test_newer_image_with_credentials_is_offered(
|
|
hass: HomeAssistant, init_integration, firmware_dir: Path
|
|
) -> None:
|
|
put(firmware_dir, "a.img", version=NEWER, content=CONTENT_WITH_SSID)
|
|
await rescan(hass)
|
|
state = hass.states.get(entity_id_for(hass, "update", "firmware"))
|
|
assert state.state == STATE_ON
|
|
assert state.attributes[ATTR_LATEST_VERSION] == NEWER
|
|
assert wifi_issue(hass, init_integration) is None
|
|
|
|
|
|
@pytest.mark.parametrize(
|
|
"image",
|
|
[
|
|
{
|
|
"device_type": "gu10_cw",
|
|
"version": "0.4.0",
|
|
}, # other type that only differs in the suffix
|
|
{"device_type": "gu10_rgb", "version": "0.3.8-36-gffff0"}, # same version, other hash
|
|
{"device_type": "gu10_rgb", "version": "0.3.8"}, # older
|
|
],
|
|
)
|
|
async def test_unsuitable_images_are_not_offered(
|
|
hass: HomeAssistant, init_integration, firmware_dir: Path, image: dict[str, str]
|
|
) -> None:
|
|
put(firmware_dir, "a.img", content=CONTENT_WITH_SSID, **image)
|
|
await rescan(hass)
|
|
assert hass.states.get(entity_id_for(hass, "update", "firmware")).state == STATE_OFF
|
|
|
|
|
|
async def test_wifi_guard_blocks_image_without_credentials(
|
|
hass: HomeAssistant, init_integration, firmware_dir: Path
|
|
) -> None:
|
|
nocreds = put(firmware_dir, "nocreds.img", version=NEWEST, content=CONTENT_WITHOUT_SSID)
|
|
await rescan(hass)
|
|
entity_id = entity_id_for(hass, "update", "firmware")
|
|
assert hass.states.get(entity_id).state == STATE_OFF
|
|
issue = wifi_issue(hass, init_integration)
|
|
assert issue is not None
|
|
assert issue.translation_placeholders == {
|
|
"name": "Klyqa GU10 RGB CW/WW 06b8",
|
|
"version": NEWEST,
|
|
"device_type": "gu10_rgb",
|
|
"ssid": "ninIOT",
|
|
}
|
|
|
|
put(firmware_dir, "creds.img", version=NEWER, content=CONTENT_WITH_SSID)
|
|
await rescan(hass)
|
|
assert hass.states.get(entity_id).attributes[ATTR_LATEST_VERSION] == NEWER
|
|
assert wifi_issue(hass, init_integration) is not None # the newer, blocked one is still there
|
|
|
|
nocreds.unlink()
|
|
await rescan(hass)
|
|
assert hass.states.get(entity_id).attributes[ATTR_LATEST_VERSION] == NEWER
|
|
assert wifi_issue(hass, init_integration) is None
|
|
|
|
|
|
async def test_lamp_with_stored_wifi_gets_image_without_credentials(
|
|
hass: HomeAssistant, init_integration, firmware_dir: Path, lamp_settings: dict[str, Any]
|
|
) -> None:
|
|
lamp_settings.clear()
|
|
lamp_settings.update(SETTINGS_STORED)
|
|
put(firmware_dir, "nocreds.img", version=NEWEST, content=CONTENT_WITHOUT_SSID)
|
|
await rescan(hass)
|
|
assert (
|
|
hass.states.get(entity_id_for(hass, "update", "firmware")).attributes[ATTR_LATEST_VERSION]
|
|
== NEWEST
|
|
)
|
|
assert wifi_issue(hass, init_integration) is None
|
|
|
|
|
|
async def test_lamp_without_ssid_gets_nothing(
|
|
hass: HomeAssistant, init_integration, firmware_dir: Path, lamp_info: dict[str, Any]
|
|
) -> None:
|
|
lamp_info["wifi"]["ssid"] = ""
|
|
await init_integration.runtime_data.async_refresh()
|
|
put(firmware_dir, "creds.img", version=NEWER, content=CONTENT_WITH_SSID)
|
|
await rescan(hass)
|
|
assert hass.states.get(entity_id_for(hass, "update", "firmware")).state == STATE_OFF
|
|
|
|
|
|
async def test_unreadable_settings_keep_previous_offer(
|
|
hass: HomeAssistant, init_integration, firmware_dir: Path, mock_client: MagicMock
|
|
) -> None:
|
|
mock_client.get_settings.side_effect = NinlightConnectionError("down")
|
|
put(firmware_dir, "creds.img", version=NEWER, content=CONTENT_WITH_SSID)
|
|
await rescan(hass)
|
|
assert hass.states.get(entity_id_for(hass, "update", "firmware")).state == STATE_OFF
|
|
|
|
|
|
async def test_install_serves_image_once_and_waits_for_new_version(
|
|
hass: HomeAssistant,
|
|
hass_client_no_auth: ClientSessionGenerator,
|
|
init_integration,
|
|
mock_client: MagicMock,
|
|
lamp_info: dict[str, Any],
|
|
firmware_dir: Path,
|
|
) -> None:
|
|
path = put(firmware_dir, "a.img", version=NEWER, content=CONTENT_WITH_SSID)
|
|
await rescan(hass)
|
|
client = await hass_client_no_auth()
|
|
served: dict[str, Any] = {}
|
|
|
|
async def lamp_downloads(url: str) -> None:
|
|
served["url"] = url
|
|
response = await client.get(urlsplit(url).path)
|
|
served["status"] = response.status
|
|
served["body"] = await response.read()
|
|
served["ota_flag"] = init_integration.runtime_data.ota_in_progress
|
|
lamp_info["fw_version"] = NEWER
|
|
lamp_info["uptime"] = 4
|
|
|
|
mock_client.fw_update.side_effect = lamp_downloads
|
|
await install(hass)
|
|
await hass.async_block_till_done()
|
|
|
|
assert served["url"].startswith(f"{BASE}/api/ninlight/firmware/")
|
|
assert (served["status"], served["body"]) == (200, path.read_bytes())
|
|
assert served["ota_flag"] is True
|
|
assert (await client.get(urlsplit(served["url"]).path)).status == 404
|
|
assert len(hass.data[DATA_SHARED].registry) == 0
|
|
state = hass.states.get(entity_id_for(hass, "update", "firmware"))
|
|
assert state.attributes[ATTR_INSTALLED_VERSION] == NEWER
|
|
assert state.attributes[ATTR_IN_PROGRESS] is False
|
|
assert state.state == STATE_OFF
|
|
assert init_integration.runtime_data.ota_in_progress is False
|
|
|
|
|
|
async def test_install_serves_exactly_the_verified_bytes(
|
|
hass: HomeAssistant,
|
|
hass_client_no_auth: ClientSessionGenerator,
|
|
init_integration,
|
|
mock_client: MagicMock,
|
|
lamp_info: dict[str, Any],
|
|
firmware_dir: Path,
|
|
) -> None:
|
|
"""F1: the lamp must receive exactly the bytes checked (Wi-Fi guard, type, hash) at install
|
|
time, even if the file on disk is replaced by something else afterwards - e.g. a build script
|
|
that writes the no-credentials variant over the same filename mid-update.
|
|
"""
|
|
path = put(firmware_dir, "a.img", version=NEWER, content=CONTENT_WITH_SSID)
|
|
verified_bytes = path.read_bytes()
|
|
await rescan(hass)
|
|
client = await hass_client_no_auth()
|
|
served: dict[str, Any] = {}
|
|
|
|
async def lamp_downloads(url: str) -> None:
|
|
# Swap in a different, otherwise-valid image for the same device type right before the
|
|
# lamp "fetches" it. The Wi-Fi guard already passed for `verified_bytes`; this replacement
|
|
# has no credentials at all and must never reach the lamp.
|
|
path.write_bytes(build_image(version=NEWER, content=CONTENT_WITHOUT_SSID))
|
|
served["url"] = url
|
|
response = await client.get(urlsplit(url).path)
|
|
served["status"] = response.status
|
|
served["body"] = await response.read()
|
|
lamp_info["fw_version"] = NEWER
|
|
lamp_info["uptime"] = 4
|
|
|
|
mock_client.fw_update.side_effect = lamp_downloads
|
|
await install(hass)
|
|
await hass.async_block_till_done()
|
|
|
|
assert served["status"] == 200
|
|
assert served["body"] == verified_bytes
|
|
assert served["body"] != path.read_bytes() # the swapped-in file, not what was served
|
|
|
|
|
|
async def test_rescan_during_install_does_not_trigger_evaluation(
|
|
hass: HomeAssistant,
|
|
init_integration,
|
|
mock_client: MagicMock,
|
|
lamp_info: dict[str, Any],
|
|
firmware_dir: Path,
|
|
) -> None:
|
|
"""M2: a catalog rescan landing while an install is in progress must not evaluate offers
|
|
against the (currently flashing) lamp - that would mean extra requests to it and could churn
|
|
the offer/issue underneath the install.
|
|
"""
|
|
put(firmware_dir, "a.img", version=NEWER, content=CONTENT_WITH_SSID)
|
|
await rescan(hass)
|
|
calls_before_rescan: dict[str, int] = {}
|
|
|
|
async def lamp_flashes(url: str) -> None:
|
|
# a periodic catalog scan happens to land while this install is in progress
|
|
calls_before_rescan["count"] = mock_client.get_settings.await_count
|
|
await rescan(hass)
|
|
lamp_info["fw_version"] = NEWER
|
|
lamp_info["uptime"] = 4
|
|
|
|
mock_client.fw_update.side_effect = lamp_flashes
|
|
await install(hass)
|
|
await hass.async_block_till_done()
|
|
|
|
assert mock_client.get_settings.await_count == calls_before_rescan["count"]
|
|
|
|
|
|
@pytest.mark.parametrize(
|
|
("lamp_reaction", "key", "reason_part"),
|
|
[
|
|
({"last_ota_error": "hash"}, "update_failed", "hash"),
|
|
({"uptime": 3}, "update_failed", INSTALLED), # rebooted, still the old firmware
|
|
],
|
|
)
|
|
async def test_install_reports_lamp_failures(
|
|
hass: HomeAssistant,
|
|
init_integration,
|
|
mock_client: MagicMock,
|
|
lamp_info: dict[str, Any],
|
|
firmware_dir: Path,
|
|
lamp_reaction: dict[str, Any],
|
|
key: str,
|
|
reason_part: str,
|
|
) -> None:
|
|
put(firmware_dir, "a.img", version=NEWER, content=CONTENT_WITH_SSID)
|
|
await rescan(hass)
|
|
|
|
async def lamp_fails(url: str) -> None:
|
|
lamp_info.update(lamp_reaction)
|
|
|
|
mock_client.fw_update.side_effect = lamp_fails
|
|
with pytest.raises(HomeAssistantError) as raised:
|
|
await install(hass)
|
|
assert raised.value.translation_key == key
|
|
assert reason_part in raised.value.translation_placeholders["reason"]
|
|
assert len(hass.data[DATA_SHARED].registry) == 0
|
|
assert init_integration.runtime_data.ota_in_progress is False
|
|
|
|
|
|
async def test_install_busy_lamp(
|
|
hass: HomeAssistant, init_integration, mock_client: MagicMock, firmware_dir: Path
|
|
) -> None:
|
|
put(firmware_dir, "a.img", version=NEWER, content=CONTENT_WITH_SSID)
|
|
await rescan(hass)
|
|
mock_client.fw_update.side_effect = NinlightBusyError(409, "an update is already running")
|
|
with pytest.raises(HomeAssistantError) as raised:
|
|
await install(hass)
|
|
assert raised.value.translation_key == "update_busy"
|
|
assert len(hass.data[DATA_SHARED].registry) == 0
|
|
|
|
|
|
async def test_install_times_out(
|
|
hass: HomeAssistant, init_integration, firmware_dir: Path, monkeypatch: pytest.MonkeyPatch
|
|
) -> None:
|
|
monkeypatch.setattr(update_module, "OTA_TIMEOUT_S", 0)
|
|
put(firmware_dir, "a.img", version=NEWER, content=CONTENT_WITH_SSID)
|
|
await rescan(hass)
|
|
with pytest.raises(HomeAssistantError) as raised:
|
|
await install(hass)
|
|
assert raised.value.translation_key == "update_timeout"
|
|
|
|
|
|
async def test_install_needs_http_address(
|
|
hass: HomeAssistant, mock_client: MagicMock, firmware_dir: Path
|
|
) -> None:
|
|
await async_process_ha_core_config(hass, {"internal_url": "https://ha.local:8123"})
|
|
entry = MockConfigEntry(
|
|
domain=DOMAIN, unique_id=MAC_RGB, data={CONF_HOST: HOST_RGB, CONF_TOKEN: TOKEN}
|
|
)
|
|
entry.add_to_hass(hass)
|
|
assert await hass.config_entries.async_setup(entry.entry_id)
|
|
put(firmware_dir, "a.img", version=NEWER, content=CONTENT_WITH_SSID)
|
|
await rescan(hass)
|
|
with pytest.raises(HomeAssistantError) as raised:
|
|
await install(hass)
|
|
assert raised.value.translation_key == "no_http_url"
|
|
mock_client.fw_update.assert_not_awaited()
|
|
|
|
|
|
async def test_install_rechecks_wifi_right_before_sending(
|
|
hass: HomeAssistant,
|
|
init_integration,
|
|
mock_client: MagicMock,
|
|
firmware_dir: Path,
|
|
lamp_settings: dict[str, Any],
|
|
monkeypatch: pytest.MonkeyPatch,
|
|
) -> None:
|
|
# Guards against a regression that would let this install slip past the re-check into the
|
|
# wait loop: without this it would hang for the full OTA_TIMEOUT_S (12 min) instead of failing
|
|
# fast with "wifi_guard".
|
|
monkeypatch.setattr(update_module, "OTA_TIMEOUT_S", 0)
|
|
lamp_settings.clear()
|
|
lamp_settings.update(SETTINGS_STORED)
|
|
put(firmware_dir, "nocreds.img", version=NEWEST, content=CONTENT_WITHOUT_SSID)
|
|
await rescan(hass)
|
|
assert hass.states.get(entity_id_for(hass, "update", "firmware")).state == STATE_ON
|
|
|
|
lamp_settings["wifi"]["source"] = "compiled" # the lamp forgot its stored Wi-Fi meanwhile
|
|
with pytest.raises(HomeAssistantError) as raised:
|
|
await install(hass)
|
|
assert raised.value.translation_key == "wifi_guard"
|
|
assert raised.value.translation_placeholders == {"ssid": "ninIOT"}
|
|
mock_client.fw_update.assert_not_awaited()
|
|
|
|
|
|
async def test_install_rejects_changed_file(
|
|
hass: HomeAssistant, init_integration, mock_client: MagicMock, firmware_dir: Path
|
|
) -> None:
|
|
path = put(firmware_dir, "a.img", version=NEWER, content=CONTENT_WITH_SSID)
|
|
await rescan(hass)
|
|
path.write_bytes(build_image(version=NEWEST, content=CONTENT_WITH_SSID))
|
|
with pytest.raises(HomeAssistantError) as raised:
|
|
await install(hass)
|
|
assert raised.value.translation_key == "image_invalid"
|
|
mock_client.fw_update.assert_not_awaited()
|
|
|
|
|
|
async def test_install_rejects_downgrade(
|
|
hass: HomeAssistant,
|
|
init_integration,
|
|
mock_client: MagicMock,
|
|
lamp_info: dict[str, Any],
|
|
firmware_dir: Path,
|
|
) -> None:
|
|
"""The lamp may have been reflashed by another route since the offer was computed."""
|
|
put(firmware_dir, "a.img", version=NEWER, content=CONTENT_WITH_SSID)
|
|
await rescan(hass)
|
|
entity_id = entity_id_for(hass, "update", "firmware")
|
|
assert hass.states.get(entity_id).attributes[ATTR_LATEST_VERSION] == NEWER
|
|
|
|
# A newer image also appears on disk, and the lamp is reflashed by another route to a version
|
|
# newer than our stale offer - but the follow-up evaluation (triggered by the catalog scan)
|
|
# fails at get_settings and returns early, so the stale NEWER offer survives untouched.
|
|
put(firmware_dir, "b.img", version=EVEN_NEWER, content=CONTENT_WITH_SSID)
|
|
mock_client.get_settings.side_effect = NinlightConnectionError("down")
|
|
lamp_info["fw_version"] = NEWEST
|
|
await rescan(hass)
|
|
assert hass.states.get(entity_id).attributes[ATTR_LATEST_VERSION] == NEWER
|
|
|
|
with pytest.raises(HomeAssistantError) as raised:
|
|
await install(hass)
|
|
assert raised.value.translation_key == "no_update"
|
|
mock_client.fw_update.assert_not_awaited()
|
|
|
|
|
|
async def test_install_rejects_concurrent_calls(
|
|
hass: HomeAssistant,
|
|
init_integration,
|
|
mock_client: MagicMock,
|
|
lamp_info: dict[str, Any],
|
|
firmware_dir: Path,
|
|
) -> None:
|
|
"""A second call arriving in the pre-flag window (before in_progress is set) must be
|
|
rejected by our own lock rather than allowed to touch OTA state.
|
|
|
|
HA's own service-level "already in progress" guard only helps once `_attr_in_progress` is
|
|
already True (it is a `cached_property` that HA invalidates whenever `_attr_in_progress` is
|
|
set, so it is never stale) - by the time that guard would fire, a second concurrent call is
|
|
already blocked by HA itself with translation_key "update_in_progress", not "update_busy".
|
|
The real gap I2 describes is *before* that: image verification, `get_info` and `get_settings`
|
|
are all awaited before we ever set the flags, and HA's guard does not protect that window. This
|
|
test
|
|
blocks the first `get_info()` re-check inside that window to reach it deterministically.
|
|
"""
|
|
put(firmware_dir, "a.img", version=NEWER, content=CONTENT_WITH_SSID)
|
|
await rescan(hass)
|
|
entity_id = entity_id_for(hass, "update", "firmware")
|
|
|
|
entered = asyncio.Event()
|
|
release = asyncio.Event()
|
|
first_call = True
|
|
|
|
async def blocking_get_info() -> dict[str, Any]:
|
|
nonlocal first_call
|
|
if first_call:
|
|
first_call = False
|
|
entered.set()
|
|
await release.wait()
|
|
return deepcopy(lamp_info)
|
|
|
|
async def lamp_flashes(url: str) -> None:
|
|
lamp_info["fw_version"] = NEWER
|
|
lamp_info["uptime"] = 4
|
|
|
|
mock_client.get_info.side_effect = blocking_get_info
|
|
mock_client.fw_update.side_effect = lamp_flashes
|
|
|
|
task1 = hass.async_create_task(install(hass), name="install #1")
|
|
async with asyncio.timeout(5):
|
|
await entered.wait()
|
|
|
|
# Install #1 is blocked inside its pre-flag get_info() re-check: the lock is held, but
|
|
# in_progress/ota_in_progress are still untouched.
|
|
assert init_integration.runtime_data.ota_in_progress is False
|
|
assert hass.states.get(entity_id).attributes[ATTR_IN_PROGRESS] is False
|
|
|
|
with pytest.raises(HomeAssistantError) as raised:
|
|
await install(hass)
|
|
assert raised.value.translation_key == "update_busy"
|
|
assert init_integration.runtime_data.ota_in_progress is False
|
|
assert hass.states.get(entity_id).attributes[ATTR_IN_PROGRESS] is False
|
|
|
|
release.set()
|
|
async with asyncio.timeout(5):
|
|
await task1
|
|
assert init_integration.runtime_data.ota_in_progress is False
|
|
assert hass.states.get(entity_id).attributes[ATTR_IN_PROGRESS] is False
|
|
assert hass.states.get(entity_id).attributes[ATTR_INSTALLED_VERSION] == NEWER
|
|
|
|
|
|
async def test_removing_the_entry_clears_the_wifi_issue(
|
|
hass: HomeAssistant, init_integration, firmware_dir: Path
|
|
) -> None:
|
|
put(firmware_dir, "nocreds.img", version=NEWEST, content=CONTENT_WITHOUT_SSID)
|
|
await rescan(hass)
|
|
assert wifi_issue(hass, init_integration) is not None
|
|
assert await hass.config_entries.async_remove(init_integration.entry_id)
|
|
await hass.async_block_till_done()
|
|
assert wifi_issue(hass, init_integration) is None
|